大粗鳮巴久久久久久久久,婷婷色婷婷开心五月四房播播 ,国产成人亚洲综合色影视,亚洲欭美日韩颜射在线二,国产高潮A片羞羞视频涩涩

SQP驗廠-風險管理系統

Risk Management Systems  SQP驗廠-風險管理系統

      FUNDAMENTAL: The company shall have a product risk management plan, based on a risk assessment system which shall be systematic, comprehensive, thorough, fully implemented and maintained. Companies must be aware of and refer to; up to date legislation, product standards, codes of practice and developments in science or technology that may impact the risk concerning their products and packaging where these exist in the countries of intended sale.

      基礎：公司有一個產品的風險管理計劃，根據風險評估系統，將系統，全面，深入，全面實施和保持。公司必須認識和參考目前的立法，產品標準，規范和科學技術的發展有可能影響風險有關的產品和包裝這些存在于國家的預期銷售。

1、Legislative and Safety Requirements sqp驗廠立法和安全要求
1.1   Is the company aware of relevant legislation, mandatory standards and industry/customer codes of practice applicable to the product in the countries of intended sale?
1.2   Does the company have a mean of validating information impacting product safety,quality and legality, where such information is provided by the customer or related party?
1.3   Does the company have a process in place for ensuring it is kept informed of changes to relevant legislation, standards etc?

2、Risk Assessment (Documentation) SQP驗廠風險評估（文件）
2.1   Does the company establish a product risk assessment  for each product or a group of similar products, e.g., FMEA?
2.2   Does the product risk assessment address the following aspects which have an effect on product safety and legality?
   2.2.1   User types (e.g., new born, young children, vulnerable people i.e., elderly, disabilities)
   2.2.2   Product use (e.g., behaviour, durability, user awareness, information and advice)
2.3   Does the product risk assessment determine the following?
   2.3.1   Possible Hazard/Risk Identification (e.g., Chemical, Physical, Regulatory);
   2.3.2   Risk level for each identified hazard/risk (e.g., Severe, High, Moderate, Slight);
   2.3.3   Whether the risk is acceptable considering the probability or likelihood and the severity and potential consequences of the effects on consumer safety (e.g., Not Acceptable, Review & Approve, Acceptable)
2.4   Where manufacturing sites have no responsibility for product design, is the company provided with a validated copy of the product risk assessment?
2.5   Does the company conduct a process risk assessment  of hazards potentially introduced during the production, packaging or storage processes?
2.6   Does the process risk assessment take the following into account?
   2.6.1   manufacturing parameters such as pressure, time, temperature
   2.6.3   conditions of equipment, moulds, dies, machinery
   2.6.4   chemicals / materials used for equipment (e.g. lubricating oils and paints)
   2.6.5   calibration of equipment
   2.6.6   policies on foreign body contamination (e.g. needles, metal, glass and brittle plastics)
   2.6.7   policies on microbiological contamination (e.g. hygiene of toilet & canteen, pest control)
   2.6.8   personal protective equipment (including specific clothing and footwear)
2.7   Does the process risk assessment identify the following?
   2.7.1   A list of potential risk or hazards in the production process
   2.7.2   Control points to manage the identified risk to acceptable level
   2.7.3   Accept / reject limits defined for each control point
   2.7.4   Corrective action to be taken where a CCP is out of control
   2.7.5   Responsibility of Control Points
   2.7.6   Records of monitoring &  reviews
2.8   If the assessment resulted in unacceptable risk, does the company go back to product design process or customer for modification to achieve acceptable risk?

3、Verification of Risk Assessment SQP驗廠風險評估的驗證
3.1   Is the verification of risk assessment carried out prior to production?
3.2   Is the risk assessment carried out by competent personnel (internal or external)?
3.3   Is the risk assessment regularly reviewed, at least annually or when changes made to product design and materials and/or key manufacturing processes?
3.4   Where required by legislation, does the company document and verify the identity,qualifications and/or licence of the person providing the safety review or risk assessment?
3.5   Where required by legislation or when it is necessary to confirm its safety or legality,does the risk assessment include the testing results of a representative product?